|
| Pumps - BE – Multistage Self Priming |
 |
|
|
|
| Self Priming Pumps A Series |
|
| Technical Details |
 |
Capacity |
|
Max. 5500 L.P.M. |
|
Head Max. 260 Mtrs. Speed Normal : 1450 RPM |
|
Max : 1800 RPM Temperature Max. 60 C for Standard pump Max. |
|
100 C for Hot Water Pump 'H' Suction Lift Max. 8 M.for Standard Pump Shaft Sealing Stuffing Box or Mechanical Seal Connection BSP threads in Counter flanges Rotation Clockwise when looking from drive end. Anti-clockwise in RR Pump. |
|
| Features |
|
Pump type ‘A’ are horizontal, lateral channel, self priming pumps acting on
regenerative principal. Both suction and delivery branches are vertical so that liquid
remains inside the pumps even when the pump is switched off. This ensures priming
of the pump. The rotor of the pump is supported by antifriction bearings at both
ends. These bearing are grease lubricated. The pumps are provided with stuffing box
packing. Depending on the application, mechanical seal can also be provided. Pump
type ‘A’ are designed for continuous operation handling only clear liquid, free from
any suspended particles. |
| Application |
| Transfer of liquid containing air or gas LPG, Liquid propane, mineral oil transfer and other industrial applications Bilge, Ballast, Fuel oil transfer, Fire fighting and other Marine applications Domestic Water Supply. |
| MOC |
|
Suction Cover Close grained Cast Iron |
|
Delivery Cover Close grained Cast Iron |
|
Immediate Parts Close grained Cast Iron |
|
Impeller H.T. Brass./ Bronze |
|
Shaft Stainless Steel |
|
Shaft Sealing Graphite Asbestos / M. Seal |
|
Special materials available on demand. |
|
|
|
| Self Priming Pumps AO Series |
|
| Technical Details |
|
Capacity: max. 130 LPM. |
|
|
Head: max. 80 M. |
|
Speed: 1450 RPM (Normal) 1800 RPM Max.) |
|
Temperature: Max 600C for standard pump Max 1000C for Hot water pump ‘H’ |
|
Suction lift: Max 8 M. |
|
Rotation: clockwise when looking from drive end. Anti-clockwise in ‘RR’ pump. |
|
| Features |
|
Horizontal, lateral channel, self priming design for continuous operation handling clear liquid free from any
suspended particle. |
|
Suction and delivery branches are vertical and flanges are oval. Counter flanges are provided with BSP
thread. |
|
Pumps are provided with one grease lubricated ball bearing and one bush bearing flushed by liquid handled. |
|
For special applications mechanical seal can be fitted. |
|
| Application |
|
Transfer of liquid containing air or gas |
|
Domestic water supply |
|
Various marine application |
|
Refrigeration, fuel oil etc. |
|
| MOC |
|
Suction cover, Delivery cover, Intermediate parts - Close Grained Cast Iron |
|
Impeller - HT Brass |
|
Shaft - Stainless Steel |
|
Shaft sealing - Gland Packing/Mechanical Seal |
|
|
|
| |
|
|
